A swing gate looks nice while it is opening, is easier to install, and is usually safer than a sliding gate. A sliding gate is necessary where there is a steep uphill grade in the direction the gate must swing, or when there is limited maneuvering room on the property.

If there is not any electrical power near the site of the gate, you can use a solar powered gate operator.

The material we use for our gates is wrought iron.

There are keypad, photo eye, intercom and telephone entry systems. Transmitters open the gate from the outside. When exiting, a free exit loop opens the gate from the inside, then closes it automatically.

You can use a cantilever arm operator, or an underground motor.

If you have sufficient side clearance, any system would work.

This system will fit most gate types.

The underground systems are not seen when they are installed, and they fit most applications.

The standard receiver has a range of 30 to 40 feet, but if a further distance is needed, there is an external receiver, which increases the range.

You can have a intercom installed which has a call button. A handset and a release button are located in the house which allows you to communicate with the visitors and open the gates.

Access control equipment can be supplied to you, that suits your personal requirements, or you can have a keypad for greater security.